Double acting hydraulic cylind
發布時間：2009-09-20 來源：揚子工具集團 瀏覽次數:50054This Japanese Industrial Standard specifies the double acting hydraulic cylinders亚洲Av库在线观看国产，hereafter referred to as the”cylinders”色色男人网，to be used in the hydre-ulic systems(2)for mechanical equipment(1)．2．JIS Notes(1)Those which are used in production such as manufacturir g and assemblin9．
(2)Those which are prescribed in JIS B 8361．
Remarks l．
2．
Definitions
B 0142 applyxx国产，
The units and numerical values given in()in this E tands中文字幕国产精品一区，rd
are based on the traditional units and are appended for
informative reference．
The standards cited in this Standard are shown in／．ttached
Table 2毛片一级农村毛片，and corre8ponding International Standards are
shown in Attached Table 3．
For the main terms used in this Standard9色蝌蚪，the defini；ions in
and the rest of the terms shall be as follows：
Informative reference：The definitions for terms are given in IS0 5 598．
(1) maximum permissible working pressure The maximum value pe】missible
for pressure generated inside the cylinder．
Remarks：This means such pressures as internal pressure免费视频好爽好湿叫国产，which．results
from the absorption of energy when inertial loads are．topped在线观看免费观看国产黄p，
and surge pressure．which is generated when the direc：ion of oil
flow is changed．
(2)—nominal—pressure The pressure assigned for the purpose of cony(nient
designation，and the maximum value of the set pressures for reliev ng valves
provided in an oil hydraulic circuit using cylinders．
minimum operating pressure．The minimum pressure capable of久久精品亚洲国产一区二区，,uaran-
teeing the opera,on of the cylinder．
(4)—head—end Closed end of the cylinder．
(5)—rod—end End of a cylinder through which the piston rod passes．
Informative reference：
Head end Rod end
2
B 8354．1992
where成年人视频网址，
A theoretical fluid force acting on the surface of a piston．
E^=0．1×P X A
慨JI=P X A)
EJl： cylinder force(kN){kgfl
P： nominal pressure acting on the surface of
the piston(MPa){kgf／cm2)
A： effective cross-sectional area of the piston
(cm2)
A mechanical force transmitted by a piston rod．
(8)—thrust efficien—cy of cylinder The ratio of the cylinder output force to the
cylinder force．
where，
thrust efficiency of cylinder
cylinder output force(kN){kgf}
nominal working pressure acting on the
surface of a piston(MPa){kgf／cm2)
A： effective cross·sectional area of the piston
(cm2) ．
．c．．．y．．．．．1．．i．．．n．．．．．d．．．．．e．．．．r．．．．．．c．．．．u．．．．．s．．．h．．．．．i．．．o．．．．n．．．．．i．．．n．．．—9— Means whereby the movement of a rod is decelerated
as it approaches the end of its stroke by restricting the discharge of fluid
automatically．
3一—Surrou—ndings The cylinders shall be used in indoor surroundings and
shall not be used in the surroundings of excessive vibration人操人人人干，contamination男女交配视频免费观看，and
high humidity．
3．2 Ambient temperature The ambient temperature shall be一5。C t0 80欧美色图一级黄片。C．
3．3 Working fluid The working fluid used shall be mineral working oil．
The piston speeds shall be as given in Table l．
Table l．Piston speeds
|
Tube bores IIIIIl
|
Piston speed mm／s
|
|
32 40 50 63
|
8 t0 400
|
|
80 100 125
|
8t0300
|
|
140 160 180
200 220 250
|
8t0200
|
shall be not more than the values shown in Figs．1成人网站日韩在线视频观看免费，2 and 3．
B 8354．1992
3．6 Maximum permissible working pressures The maximum permissible
working pressures for cylinders shall be classified as given in Table 2．
Table 2．Maximum permissible working pressures
Unit：MPa{kgf／cm2)
|
|
|
Rod end
|
||
|
Nominal pressure
|
Head end
|
Red diameter
symbolA
|
Rod diameter
SymbolB
|
Rod diameter
symbol C
|
|
7(70l
|
8.8{90】
|
14.7{150)
|
12.7{130)
|
10.8{110)
|
|
14 f140】
|
17.7(180】
|
17.7 f180】
|
17.7 f180l
|
13.7(140】
|
|
21{210)
|
26.5{270)
|
26.5{270l
|
24.5{250l
|
|
4．Types The types of the cylinders shall be classified as given in the
following according to nominal pressures，mounting forms免费强奸视频网站，materials of packing
and gasketwww.ccfdmy.com，cushionings，external leakages(1eakages from rod wiper portion)日韩美女观看成人片在线播放网站，and
with or without switches．
(1) Nominal pressure The cylinders shall be classified as given in Table 3
according to the nominal pressures：
Table 3．Nominal pressures of cylinder
Unit：MPa
Nominal pressure
7{70)
14(140l
21 1210l
(2) Mounting forms The cylinders shall be classified as given in Table 4
according to the mounting forms：
Table 4．Mounting forms
|
|
Mounting type
|
Symbol
|
Remarks
|
|
|
|
Right-angled to axis foot type
|
LA
|
(MS 2)
|
Tables l9＆20
|
|
Foot types
|
Axial direction foot type
|
LB
|
(MS l)
|
Table21
|
|
|
Rod-end rectangular flange type
|
FA
|
(MF l)
|
Tables 22,23＆24
|
|
Head-end rectangular flange type
|
FB
|
(MF 2)
|
Tables22,23＆24
|
|
|
Flange types
|
ROd-end square flange type
|
FC
|
(MF 5)
|
Table25
|
|
Head-end square flange type
|
FD
|
(M田6)
|
Table25
|
|
|
|
Detachable eye type
|
CA
|
(MP4)
|
Table 26
|
|
Crevice
|
Detachable crevice type
|
CB
|
(M：P2)
|
Table 26
|
|
types
|
Fixed eye type
|
CC
|
(MP3)
|
Table 27
|
|
|
Rod-end integral trunnion type
|
TA
|
(MT l)
|
Table 28
|
|
Trunnion
|
Head·end integral trunnion type
|
TB
|
(MT 2)
|
Table 28
|
|
types
|
Intermediate fixed trunnion type
|
TC
|
(MT4)
|
Tables 29＆30
|
7
E 8354．1992
Remarks l．Those of which mounting methods are inevitably particular ones shall be
designated as X-shape欧美黑妞A片黑妞BBW，such as LX，F(xiàn)X and the like．
2．
The fixed eye form in the crevice types shall mean an integrated construc-
tion in which an eye fitting is welded with the headh视频一区二区，and the deb tchable
eye form and detachable crevice form shall mean those construct ion in
which eyes and crevice fittings have been assembled with bodies by tie
rods．
3．The symbols given in()are shown for informative reference99日韩精品，al．d are in
accordance with JIS B 8366．
(3) Materials of packing and gasket
as given in Table 5 according to
Packings and gaskets shall be(1assified
materials．
Table 5．Materials of packing and gasket
|
Material of packing and gasket
|
Symbol
|
|
Nitrile rubber
|
l
|
|
Urethane rubber
|
2
|
|
Fluorine。contained rubber
|
3
|
|
Ethylene tetrafluoride resin
|
4
|
|
Metal ．
|
5
|
|
Others
|
6
|
本文鏈接: http://gdtzh.cn/yzgjcn_172.html
如需轉載請注明:揚子工具液壓千斤頂http://gdtzh.cn
本文章總10頁 1 2 3 4 5 6 7 8 9 10 下一頁
上一篇:伸縮式套筒液壓缸下一編:液壓接頭和插頭尺寸規范
| 千斤頂相關知識 |
| ■液壓油缸支承襯套的材料及裝配部位和裝配間隙 ■液壓泵工作原理 ■雙作用單活塞桿液壓缸 ■液壓油的污染及其控制 ■液壓動力元件 ■液控盤式剎車裝置 |
| 液壓千斤頂相關產品(請點擊產品名稱查看詳細資料) |
 電動液壓千斤頂(海力F-V50-1000T) - 同步千斤頂 - 大噸位液壓頂(海力F-Q頂管機大行程)
|
大噸位分離式液 壓頂 |
|
薄型頂(噸位5-200T行程6-80mm) - 薄型同步千斤頂(薄型海力B-V) 橋梁千斤頂(海力M-B) - 超薄型千斤頂(RSM5-150T) - 薄型千斤頂(RCS5-100T)
|
空間窄小-如橋梁 更換支座 |
|
穿心千斤頂(海力H-C空心頂) - 空心千斤頂(RCH穿心頂) - 雙作用空心千斤頂(RRH)
|
具有拉伸功能空 心液壓頂 |
|
自鎖千斤頂(海力L-V50-1080T) - 自鎖同步千斤頂 - 自鎖式千斤頂(CLL)
|
需長時間支撐重 物液壓頂 |
|
分離式千斤頂(10-200T) - 手動千斤頂(5-100T) - 雙節千斤頂(多節)
|
小噸位分離式液 壓頂 |
|
超高壓千斤頂(CLR) - 電動千斤頂(DYG) - 大噸位千斤頂(CLS)
|
大噸位液壓頂舊 型號 |
|
電動泵(海力B-V電動泵站) - 手動泵(YSB單向) - 雙向手動泵(YSSB) - 單向手動泵(YCSB)
|
|
| 液壓千斤頂選型調查表(在括號中填上數據欧美性爱激情图片，并留下聯系方法wwwxxxxcon在线国产观看，最后再提交) |
